Nothing is more pleasing when the temperature drops than the soft amber blaze of a crackling fire. But before you light up that firewood, there are numerous steps you need to take to get your fireplace ready, and for excellent reason. Prepping your fireplace for fall can:
- Improve the air quality in your house
- Avert fires
- Save energy
- Keep your home warm
Chimney preparation steps are given below:
ARRANGE A YEARLY INSPECTION
All chimneys should be examined and cleaned by a chimney cleaning company at least once a year. A careful cleaning will eliminate any buildup of creosote, an oily and extremely flammable byproduct of burning wood, gives you a safer fireplace.
CLEAN THE FIREBOX
Eliminate and clean the grate and other accessories that are inside the firebox. Vacuum or remove the ash and store it in a metal container with a sealed lid. There are several ways you can recycle the ash. You can use it in your backyard as a fertilizer, to dissolve ice, and even clean the fireplace doors, for example. Be sure to keep a small amount of ash. It will help with starting your initial fire of the season.
CHECK FOR CRACKS AND DAMAGE
Check for cracks and wobbly joints of the firebricks inside the fireplace, and check the external masonry for damage. Hire an expert mason to do any repairs—never try to repair firebrick with ordinary mortar, as the blend cannot stand up to high heat.
EXAMINE THE CHIMNEY CAP AND DAMPER
Ensure the fireplace damper is working accurately and that there is no wreckage preventing it from opening and closing. Make sure that the chimney cap is firmly attached and in good condition. The cap should comprise protective screening to keep birds, squirrels, and other pests from entering the chimney.
CLEAR AWAY TREE LIMBS
While you are outside examining the chimney cap, trim any overhanging tree limbs that may be squeezing on the chimney. Tree limbs can restrict the proper draft of the chimney and spoil the cap.
CLEAR OUT ASHES
Clean out the firebox once in a week, or whenever the ash is more than an inch deep. Coals can stay hot for up to three days, so ensure everything is completely cold. Remove or vacuum the cold ashes and dispose it outside—wood ashes are just right for garden beds and compost piles.
HOW TO PREP A GAS-BURNING FIREPLACE
Clean the blower
Check your gas-burning fireplace to see if it has a blower. If it does, clean it. Distinct from furnace blowers, the blowers of gas-burning fireplaces do not have a filtering system to stop buildup. Dust buildup can cause early wearing of the bearings. Dust can insulate the motor, which prevents it from cooling correctly, eventually leading to motor failure.
Before every season, change the batteries in any remote transmitters and receivers, if appropriate. Also, replace the batteries and examine any smoke or carbon monoxide detectors to ensure they are working properly.